[Shop-talk] The road goes on forever, the plumbing never ends

[Eric Russell]

Could you attach some sort of round wire brush - like a huge gun 
cleaning brush? Something like a boiler tube cleaner?

https://www.oswaldsupply.com/1-1-2-round-fiber-boiler-tube-brush-head-mb1hf.html?kw=MB1HF&c=Shopping&gclid=Cj0KCQjwnv71BRCOARIsAIkxW9HGJ3VVgTPdLHJTl8DAgGKf_vgBYBvfYuGjg4Hz60cn7sZ8c2vMtk8aAq-8EALw_wcB 


Eric Russell
Mebane, NC

> On May 16, 2020, at 4:28 PM, Mark J Bradakis via Shop-talk <shop-talk at autox.team.net> wrote:
>
>
> The drain pipe is 2" internal diameter.  The corkscrew on the end of the snake might be 3/8" in diameter. It bores a pretty small hole in the gunk clogging the pipe, so it doesn't take long to clog again.  I don't think there are any small, handhelp drain snakes with really big tips on them, capable of cleaning the entire inside diameter of the pipe.  I have seen these at the hardware stores made for bigger, heavier machines.  Not something I want to hold head high while working on the drain.
>