[Shop-talk] Fence posts

Jim Franklin jamesf at groupwbench.org
Mon Mar 16 05:41:48 MDT 2020


I would do this, even cedar shims would likely last long enough, or pour more cement (with no aggregate) into the gaps. 

jim

> On Mar 16, 2020, at 6:15 AM, Jeff Scarbrough via Shop-talk <shop-talk at autox.team.net> wrote:
> 
> How about some plastic door/window shims?  Cheap enough, and you should be able to jam them between the post and the concrete.  Bonus is you can use two or four per hole if you need to plumb it up.  (Two, assuming the rails will hold it plum from side to side, otherwise four to hold it independently of the efence).
> 
> Jeff Scarbrough
> Corrosion Acres, Ga.
> 
> On Mon, Mar 16, 2020 at 12:12 AM Robert Nogueirao via Shop-talk <shop-talk at autox.team.net <mailto:shop-talk at autox.team.net>> wrote:
> 
> Folks, I have a 4 foot high cedar wood fence in bad shape that I need to fix. While I will replacing the rails and pickets with new wood the posts appear to be in good condition,  ie: no rot, except for the fact they are set in concrete and the posts have shrunk a bit so the posts are loose on the concrete.
> What would be the easiest way to firm up the posts in those holes? 
> I’m only looking for a fix that will last 5 or so years.
> Bob Nogueira 
> _______________________________________________
> 
> Shop-talk at autox.team.net <mailto:Shop-talk at autox.team.net>
> Donate: http://www.team.net/donate.html <http://www.team.net/donate.html>
> Suggested annual donation  $12.96
> Archive: http://www.team.net/pipermail/shop-talk <http://www.team.net/pipermail/shop-talk> http://autox.team.net/archive <http://autox.team.net/archive>
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/shop-talk/fishplate@gmail.com <http://autox.team.net/mailman/options/shop-talk/fishplate@gmail.com>
> 
> _______________________________________________
> 
> Shop-talk at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.96
> Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/shop-talk/jamesf@groupwbench.org
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/shop-talk/attachments/20200316/36ae3d4c/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 1386 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/shop-talk/attachments/20200316/36ae3d4c/attachment-0001.p7s>


More information about the Shop-talk mailing list