[Shop-talk] I put a rough draft of the truck restore on my website- Check it out

eric at megageek.com eric at megageek.com
Wed Jun 17 19:05:27 MDT 2020


John asked:
>Did you fabricate the rocker panels, kick plates, and the corner rounds 
at the back of the cab? 

I bought what panels I could.  That was both corners,driver's inner, 
driver's front kick panel, and  the one door bottom (I needed both door 
bottoms and the inner for both as well.)

 I couldn't get any passenger side kick or rockers, so I bought two 
driver's side and cut one up to work.

I made the pass. Inner, both floorboards, lots of the kick plates/rockers 
for the rear of the cab and many other pieces.



"Be as beneficent as the sun or the sea, but if your rights as a rational 
being are trenched on, die on the first inch of your territory." Ralph 
Waldo Emerson 
-Who is John Galt?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/shop-talk/attachments/20200617/a2036318/attachment.htm>


More information about the Shop-talk mailing list