[Shop-talk] angle grinder spindle adapter

[john niolon]

grinder does have a spindle nut that can be reversed to hold the larger wheel...  but the majority of
my 5/8" accessories are threaded

j

----- Original Message -----
From: John Miller <jem at milleredp.com>
To: <shop-talk at autox.team.net>
Sent: 7/30/2020 11:05:07 AM
Subject: Re: [Shop-talk] angle grinder spindle adapter
________________________________________________________________________________

> I want to do just the opposite.  I want to 'convert' the grinder with the smaller
> spindle to 5/8 so I can use my disc in it.  I keep several grinders ready.  One
> with a cutoff wheel, one with grinding rock and one with a flap disk.. and one with a wire]
> wheel...  saves time switching out media...

Doesn't the grinder already have a...uh...uh...thing that if you flip it 
over it's got a 5/8in boss on it to center the wheel?

I have never encountered an angle grinder that didn't have a centering 
thing for a 5/8in wheel no matter the shaft size.

John.
_______________________________________________

Shop-talk at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/shop-talk/jniolon@att.net