[Shop-talk] angle grinder spindle adapter

[john niolon]

Hi Mark, thanks for the reply

I want to do just the opposite.  I want to 'convert' the grinder with the smaller
spindle to 5/8 so I can use my disc in it.  I keep several grinders ready.  One
with a cutoff wheel, one with grinding rock and one with a flap disk.. and one with a wire]
wheel...  saves time switching out media...

john


----- Original Message -----
From: Mark J Bradakis <mark at bradakis.com>
To: <shop-talk at autox.team.net>
Sent: 7/29/2020 10:03:52 PM
Subject: Re: [Shop-talk] angle grinder spindle adapter
________________________________________________________________________________

On 7/29/20 2:10 PM, john niolon wrote:
> I have two Milwaukee grinders
> a 6145 with a 1/2"-13 spindle   and
> a 6148 with a 5/8-11 spindle...
> I can't find grinding rocks or cut off discs with a 1/2 arbor hole 
> plus I have a large box full of 5/8"


What, exactly, are you trying to accomplish here?  You have a grinder 
that will work with your box full of 5/8 stuff.  You can't find stuff 
that fits the 1/2" grinder, so you want to convert the 5/8 grinder that 
works with what you have to 1/2 inch that won't work with what you 
have.  Am I reading this correctly?

mjb.


_______________________________________________

Shop-talk at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/shop-talk/jniolon@att.net