[Shop-talk] Remote power switch

Jeff Scarbrough fishplate at gmail.com
Sat Apr 18 13:18:55 MDT 2020


A bit more fiddly, but look at how a central vacuum system works.  Every
place you have to plug in a hose, there are  a pair of metal pins.  Push
the hose in, and the metal sleeve connects the pins and energizes a relay
that starts the vacuum.

A relay or motor starter for the vacuum and a handy switch near each tool
would let you turn it on as you turn on each tool.  Yes, you have to flip a
switch, but you don't have to leave the tool to do it.  And I bet it's a
whole lot cheaper than a lot of these other systems.

Jeff Scarbrough
Corrosion Acres, Ga.


On Sat, Apr 18, 2020 at 11:28 AM Ronnie Day via Shop-talk <
shop-talk at autox.team.net> wrote:

> Looking for a "remote switch" that turns on a shop vac when I hit the
> trigger on a saw, router, etc. I'm certain that I've seen something like
> this but I can't seem to find anything after spending a couple of hours
> on-line.
>
> There are remote switches that use a RF remote, but I want one that senses
> the current flow when the saw's turns on which then switches on the plug
> the vacuum is plugged into.
>
> Should be able to build it, but buying off the shelf would be simpler.
>
> TIA,
> Ron
> _______________________________________________
>
> Shop-talk at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.96
> Archive: http://www.team.net/pipermail/shop-talk
> http://autox.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/shop-talk/fishplate@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/shop-talk/attachments/20200418/836a21d3/attachment.htm>


More information about the Shop-talk mailing list