[Shop-talk] Adding a tube into aluminum manifold
Jack Brooks
JIBrooks at live.com
Mon Sep 16 11:59:34 MDT 2019
Darrell,
I used the stock coolant locations and piped outside, instead of under the manifold on my TR8 with an SD1 3 piece intake.
I can provide pictures if that helps.
Jack
________________________________
From: Shop-talk <shop-talk-bounces at autox.team.net> on behalf of Darrell Walker via Shop-talk <shop-talk at autox.team.net>
Sent: Monday, September 16, 2019 10:47:49 AM
To: Peter J. Thomas <pj_thomas at comcast.net>
Cc: Steven Trovato via Shop-talk <shop-talk at autox.team.net>
Subject: Re: [Shop-talk] Adding a tube into aluminum manifold
Hi Peter,
Thanks for the reply. Is propane or MAP gas enough heat for those rods?
I forgot to mention, the pipe is 5/8”. I could drop down to 1/2” (that’s what I was going to do in the copper, then up to 5/8” with a brass hose barf). But since I’m brazing it, would straight threads be OK? Technically, there is a 5/8” NPT size defined, but I’ve not found any taps or dies in that size.
-Darrell
> On Sep 16, 2019, at 10:32 AM, Peter J. Thomas <pj_thomas at comcast.net> wrote:
>
> Drill and tap aluminum, then solder with aluminum solder rods. HD carries Bernzomatic AL3 rods, though I like the Forney Easy-Flo Aluminum Brazing Rod sold at Tractor Supply better.
>
> On 9/15/2019 2:00 PM, Darrell Walker via Shop-talk wrote:
>> I’m adapting a Land Rover intake manifold for use on my TR8. One thing I need to do is add a connection from the manifold to feed the heater. There is a place on the manifold that will work perfectly.
>>
>> My initial plan was to tap the manifold for a copper fitting. But will there be an issue with copper threaded into aluminum?
>>
>>
>
_______________________________________________
Shop-talk at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.96
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive
Unsubscribe/Manage: http://autox.team.net/mailman/options/shop-talk/jibrooks@live.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/shop-talk/attachments/20190916/50db6c04/attachment.html>
More information about the Shop-talk
mailing list