[Shop-talk] Tool Question

[Bob Spidell]

Needle-nose vice grips.

> On Sep 10, 2019, at 2:14 PM, Neil Sherry via Shop-talk <shop-talk at autox.team.net> wrote:
> 
> Rather than using brute force, get some heat on it. If has already rounded, it's reluctant to move, so deal with that first and then whatever you use will have a fighting chance.
> Neil
> 
> Sent from Outlook for Android
> 
> 
> 
> 
> On Tue, Sep 10, 2019 at 7:25 PM +0100, "Matt via Shop-talk" <shop-talk at autox.team.net> wrote:
> 
>> I have a seized bolt I am trying to loosen without breaking and it is in a hard to reach location.
>> I can't get a socket on it and the 12 point box wrench I am using is slipping off.
>> I am having trouble locating a 6 point wrench  (10mm by the way).
>>  
>> QUESTION:
>> What is your experience with the roller based wrenches that are marketed as "no slip" and well suited to partially rounded fasteners?
>>  
>> TIA!
> _______________________________________________
> 
> Shop-talk at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.96
> Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/shop-talk/bspidell@comcast.net
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/shop-talk/attachments/20190910/0f6cda28/attachment.html>