[Shop-talk] Adding a tube into aluminum manifold

Peter J. Thomas pj_thomas at comcast.net
Mon Sep 16 11:32:53 MDT 2019


Drill and tap aluminum, then solder with aluminum solder rods.  HD 
carries Bernzomatic  AL3 rods, though I like the Forney Easy-Flo 
Aluminum Brazing Rod sold at Tractor Supply better.

On 9/15/2019 2:00 PM, Darrell Walker via Shop-talk wrote:
> I’m adapting a Land Rover intake manifold for use on my TR8.  One thing I need to do is add a connection from the manifold to feed the heater.  There is a place on the manifold that will work perfectly.
>
> My initial plan was to tap the manifold for a copper fitting.  But will there be an issue with copper threaded into aluminum?
>
>



More information about the Shop-talk mailing list