[Shop-talk] alternate use for PEX fittings

[john niolon]

thanks for all the suggestions and after talking to the Gates tech guy and the guy at jegs.com I’ve ordered a couple of necessary sizes... more to come

j

From: Jimmie Mayfield via Shop-talk 
Sent: Tuesday, September 10, 2019 9:18 AM
To: shop-talk at autox.team.net 
Subject: Re: [Shop-talk] alternate use for PEX fittings

I was thinking the same.  Heat-shrink hose clamps should do the job nice and compact.



On 9/10/19 9:31 AM, Brian and Wendy via Shop-talk wrote:

  Another option would be the heat shrink hose clamp such as a Gates Powergrip

  https://www.gates.com/us/en/fluid-power/engine-hose/hose-clamps-amp-couplings/gates-powergrip-sb-clamp/p/7405-000000-000000


  Summit and Jegs both have this style of clamp in a variety of sizes.

  Brian Warrick
  Nampa, ID

------------------------------------------------------------------------------



   
_______________________________________________

Shop-talk at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/shop-talk/mayfield+shoptalk@sackheads.org





--------------------------------------------------------------------------------
_______________________________________________

Shop-talk at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/shop-talk/jniolon@att.net

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/shop-talk/attachments/20190910/964b3cdb/attachment.html>