[Shop-talk] Weird clutch petal

[Tom Shirley Sr.]

Air in the lines?

On Wed, Oct 9, 2019, 6:38 PM Robert Nogueirao via Shop-talk <
shop-talk at autox.team.net> wrote:

>
> I have a  hydraulic clutch, Girling 5/8” master and a internal slave that
> fits over the input shaft. Both are new.  Problem is I have a really good
> feeling petal, no leaks and good operation 90% of the time but occasionally
> when you depress the clutch to change gears the petal feels soft and will
> not fully release the clutch. Letting the petal out and again depressing it
> and the feel and release are again normal. Reservoir shows no lost of
> fluid.
> Since the slave is mounted on the input shaft and operates directly on the
> throw out bearing there is no linkage to cause the problem.
> Any suggestions as to what could be causing this problem?
> Bob Nogueira
> _______________________________________________
>
> Shop-talk at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.96
> Archive: http://www.team.net/pipermail/shop-talk
> http://autox.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/shop-talk/tomshirleysr44@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/shop-talk/attachments/20191009/dd2f9c7b/attachment.htm>