[Shop-talk] Miter saw blade for plastic tiles

[Berry Kercheval]

The SawStop brake cartridge is $77 from Amazon, and you can change it yourself.
https://www.amazon.com/SawStop-TSBC-10R2-Cartridge-10-Inch-Blades/dp/B001G9MGZQ
On Nov 15, 2019, 5:38 PM -0800, Pat Horne via Shop-talk <shop-talk at autox.team.net>, wrote:
> What does it cost for the puck after the hot dog trick? Back in the early days I think it was about $175 & required a trip back to the factory.
>
> I’ve slightly nicked my finger twice on my powermatic 66. Had a shop fire several years ago & it came through fine. Rebuilt it mechanically but didn’t have time for a repaint.
>
> Peace,
> Pat
>
> Pat Horne
> We support Habitat for Humanity
>
>
> > On Nov 12, 2019, at 12:35 PM, Mike Rambour via Shop-talk <shop-talk at autox.team.net> wrote:
> >
>
>
> No never tried the hot dog trick, I went with my finger. Well, with my old saw after 35 years of no accidents, I sliced my finger with my table saw, nothing too serious, its still there. But I did get a little scared and went and got a Sawstop and replaced my Unisaw, my wife figured as I get older, I may get a little more forgetful and besides my Unisaw was a 1.75HP model, so it was time to upgrade to 3HP anyway :)
>
> mike
>
>
> > On 11/12/2019 10:17 AM, John Mitchell wrote:
> > I've had some tiles down for 2 years and suddenly they started to curl up around the edges. I installed them with plenty of gap for expansion. I sent "Garage Floors" pictures and suddenly I had a delivery of all new tiles. I assume others may have had similar problems with that batch. Did you ever stick a hot dog into the saw stop?
> >
> > > On 11/12/2019 11:09 AM, Mike Rambour via Shop-talk wrote:
> > >
> > > I cut mine on my table saw with my regular wood blade, there was some melting but not much. Other tiles I cut with my sabre saw.
> > >
> > > I remember reading where someone suggested putting the saw blade on backwards to cut Racedeck, but my saw (Sawstop) wont work with the blade backwards so I never even tried.
> > >
> > > You are going to love the tiles, had mine about 15 years now, just be careful when you weld or use your plasma cutter :)
> > >
> > > mike
> > >
> > > On 11/10/2019 4:18 PM, John Mitchell via Shop-talk wrote:
> > > > I'm putting down racedeck type garage tiles and I'm wondering what the best blade is for my miter saw. Should I get the finest tooth blade I can find or will a 60 tooth 12" blade suffice?
> > > >
> > > >
> > > > _______________________________________________
> > > >
> > > > Shop-talk at autox.team.net
> > > > Donate: http://www.team.net/donate.html
> > > > Suggested annual donation $12.96
> > > > Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive
> > > >
> > > > Unsubscribe/Manage: http://autox.team.net/mailman/options/shop-talk/lists@dinospider.com
> > > >
> > >
> >
>
> --
> A gun is like a parachute, if you need one but don't have it,
> you'll probably never need one again.
>
> _______________________________________________
>
> Shop-talk at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.96
> Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/shop-talk/patintexas@icloud.com
>
>
> _______________________________________________
>
> Shop-talk at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.96
> Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/shop-talk/berry@kerch.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/shop-talk/attachments/20191116/82d8930f/attachment.htm>