[Shop-talk] Miter saw blade for plastic tiles

[John Mitchell]

I've had some tiles down for 2 years and suddenly they started to curl 
up around the edges.  I installed them with plenty of gap for 
expansion.  I sent "Garage Floors" pictures and suddenly I had a 
delivery of all new tiles.  I assume others may have had similar 
problems with that batch.  Did you ever stick a hot dog into the saw stop?

On 11/12/2019 11:09 AM, Mike Rambour via Shop-talk wrote:
>
>  I cut mine on my table saw with my regular wood blade, there was some 
> melting but not much.  Other tiles I cut with my sabre saw.
>
>  I remember reading where someone suggested putting the saw blade on 
> backwards to cut Racedeck, but my saw (Sawstop) wont work with the 
> blade backwards so I never even tried.
>
>  You are going to love the tiles, had mine about 15 years now, just be 
> careful when you weld or use your plasma cutter :)
>
>     mike
>
> On 11/10/2019 4:18 PM, John Mitchell via Shop-talk wrote:
>> I'm putting down racedeck type garage tiles and I'm wondering what 
>> the best blade is for my miter saw.  Should I get the finest tooth 
>> blade I can find or will a 60 tooth 12" blade suffice?
>>
>>
>> _______________________________________________
>>
>> Shop-talk at autox.team.net
>> Donate: http://www.team.net/donate.html
>> Suggested annual donation  $12.96
>> Archive: http://www.team.net/pipermail/shop-talk 
>> http://autox.team.net/archive
>>
>> Unsubscribe/Manage: 
>> http://autox.team.net/mailman/options/shop-talk/lists@dinospider.com
>>
>