[Shop-talk] keeping the smoke in----fuse selection for a circuit

[john niolon]

I’m wiring for my power seats in my truck project. My wiring harness didn't include this circuit so I'm coming off a battery termination point. Thinking about fusing each seat. The internal wiring is 14 ga and doing a amp check I read from 3-6 amps with any of the 3 motors (tilt/raise/for-back) running and around 12 amps when you hit the stops and the motor stalls. I know 14 ga is good for 18-20 amps but I'm trying to decide how much to fuse it.. I wanna keep the smoke inside but don't want to fuse too high.... would you consider a percentage over stall amp draw or running amp draw..... and what safety factor ??  I should already know this at my age...



john


https://jniolon.classicpickup.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/shop-talk/attachments/20191105/56bdaf34/attachment.htm>