[Shop-talk] Making a door thinner

[Pat Horne]

Probably should check for metal fasteners too

Pat Horne 
We support Habitat for Humanity


> On Dec 22, 2019, at 9:36 AM, Jimmie Mayfield via Shop-talk <shop-talk at autox.team.net> wrote:
> 

Contact a local cabinet shop and ask them how much they'd charge to run your door through their wide-belt sander a few times to take it down to 1 3/8".  Shouldn't take long at all.  They might balk if these doors are already painted/finished (it might gum up their sanding belt) so you might need to strip the finish before you drop the doors off  but contact them and see what they prefer.


_______________________________________________

Shop-talk at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/shop-talk/patintexas@icloud.com