[Shop-talk] need some copper plumbing help from the gurus

[David Scheidt]

> On Oct 20, 2018, at 12:07, john niolon <jniolon at att.net> wrote:
> 
> When we built my house/shop 25 years ago I had the plumber install a 3/4” water line to the shop and cap it off.  I was going to put in the sink and the outside faucet when I got time.  Well,  this week I got time
>  
> I cut the cap off and test fitted a 3/4” Tee to start dry fitting the plumbing for sink/faucet.  The Tee wouldn’t fit on the tubing.  I cleaned it well but the Tee was still too small to fit over the tubing.  It looks like he used coiled tubing, or at least that’s what’s coming up thru the concrete. 

Is it out of round?  That’s a common problem with soft tube.  Plumbers have rerounding tools for the problem. 

> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/shop-talk/attachments/20181021/0c2010c0/attachment.html>