[Shop-talk] Air Impact Wrenches - how much torque?

rustymetal rustymetal at sbcglobal.net
Sun Oct 7 14:42:53 MDT 2018


I swear by Air Cat. I bought a 1/2" drive 500 lbs reverse torque recently. Little to no vibration or kick back. 


Sent from my Samsung Galaxy , an AT&T LTE smartphone
-------- Original message --------From: Brian Kemp <bk13 at earthlink.net> Date: 10/7/18  12:29 PM  (GMT-08:00) To: Shop Talk <shop-talk at Autox.Team.Net> Subject: [Shop-talk] Air Impact Wrenches - how much torque? 
I'm shopping for a new air impact wrench and wondered how much torque I 
might need.  I'm replacing a Harbor Freight one that claims 250 ft-lbs, 
but can't break hand torqued wheel lugs.  If I need to undo a TR6 crank 
bolt again, I'll borrow a bigger impact wrench or just use a breaker bar 
like last time.

The primary use will be wheel lugs.  Occasional use will be brake jobs 
and related car work.

Per the sticker on the compressor specs are 5.5 SCFM at 90psi, 5HP, 26 
gal, 135psi max.  This is Husky Pro about 15 years old, so I recognize 
the HP rating is likely optimistic.  The motor requirement is 15A @ 
120V, which would indicate a more realistic HP rating in the 2HP range.

I'm not after continuous duty.  At most, it would be 5 wheel lugs then a 
break.

I'm thinking the 1000 ft-lb models are overkill and could potentially do 
damage snapping an old TR6 or GT6 bolt.  I'd rather have the tool not 
take off the nut/bolt than snap it.

The new Husky ones at Home Depot look nice, but I don't see any feedback 
on the 800 ft-lb model and only one on the 650 ft-lb model.  If I do go 
bigger, Lowes has a nice 1000 ft-lb model with a 95% recommended rating.

Any feedback is appreciated.  Since this isn't really necessary, I'm 
looking at about the $100 range.

Thanks,

Brian
_______________________________________________

Shop-talk at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/pipermail/shop-talk

Unsubscribe/Manage: http://autox.team.net/mailman/options/shop-talk/rustymetal@sbcglobal.net

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/shop-talk/attachments/20181007/a6b39963/attachment.html>


More information about the Shop-talk mailing list