[Shop-talk] Holy m#therf*cking ChrI$t HOW TO GET A TRAILER ONTO THEtHITCH

[Jack Brooks]

Scott isn't there a screw adjustment for the tightness of the ball in the housing.  It's used to eliminate rattling, but could keep the latch from closing if too tight.

Jack
________________________________
From: Shop-talk <shop-talk-bounces at autox.team.net> on behalf of Scott Hall <scott.hall.personal at gmail.com>
Sent: Monday, October 1, 2018 9:49:09 PM
To: shop-talk at autox.team.net
Subject: [Shop-talk] Holy m#therf*cking ChrI$t HOW TO GET A TRAILER ONTO THE HITCH

Need a little help, fellas, before I attack this thing with a sledge.

New H-F trailer. Requires a 1 7/8" ball.

I get a 1 7/8" ball. Test fit the ball into the hitch receiver before
installing on hitch.

Now it's all put together and the F*C(ING THING WON'T GO ON.

It's behaving as if:

1) the ball is too big (it isn't, everything is 1 7/8")

2) the latch is in the closed position (it's up)

3) there's something inside the ball receiver (there's not--I've checked
1,000,000,000 times).

The receiver is just sitting on top of the ball and won't drop over it.

Is there a trick I don't know about, or can I beat the ever living hell
out of this thing (because that's exactly what I'd like to do right now).

Everything here is new, clean, etc. I've hooked up trailers before. I
have no idea what the hell's going on here.

Send help.
_______________________________________________

Shop-talk at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/pipermail/shop-talk

Unsubscribe/Manage: http://autox.team.net/mailman/options/shop-talk/jibrooks@live.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/shop-talk/attachments/20181002/d7a1798f/attachment.html>