[Shop-talk] oven for powder coat

[Pat Horne]

Shouldn’t be a problem. I assume it runs on 220. Look for a temperature controller rated for at least the current needed, I’d go for a higher rating. 

Peace,
Pat

Pat Horne 
We support Caldwell County Habitat for Humanity


On Jun 17, 2018, at 5:46 PM, Lee Daniels <lee at automate-it.com> wrote:

I've got a line on a free Whirlpool model RBS305PDQ4 oven. The electronic
panel on the front doesn't work (turns on, but intermittent control of the
touch controls). I searched the usual repair parts places, and the consistent
answer is "this part is no longer produced, unavailable - buy a new oven".

As this is for powder-coating, all I really want to do is heat it up to 350
deg. Can I hot-wire this with a on-off switch and some kind of basic
thermostat? Any ideas?
thanks
Lee
_______________________________________________

Shop-talk at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/pipermail/shop-talk

Unsubscribe/Manage: http://autox.team.net/mailman/options/shop-talk/patintexas@icloud.com