[Shop-talk] Plumbing opportunity

[Jeff Scarbrough]

On Sun, Dec 9, 2018 at 1:47 AM David Scheidt via Shop-talk <
shop-talk at autox.team.net> wrote:

>
> Also, make sure you are allowed to use a ball valve. Some places require a
> gate valve. They worry about water hammer.


I had never heard that; it might make sense..  But can my little 1" line
hammer back into the 6" distribution line enough to make an impact?

Isn't a curb stop typically a 1/4 turn valve?

Jeff Scarbrough
Corrosion Acres, Ga.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/shop-talk/attachments/20181209/1fc4d91c/attachment.html>