[Shop-talk] Source of special plexiglass
Pat Horne
patintexas at icloud.com
Mon Apr 25 06:57:34 MDT 2016
Check into polycarbonate. It's tough stuff. McMaster-Carr has it. Don't know how thick you need.
Peace,
Pat
Pat Horne
We support Caldwell County Habitat for Humanity
On Apr 24, 2016, at 5:51 PM, eric at megageek.com wrote:
I have a soda machine that I'm about to put back in service after restoring it. It will be out in the general public.
The last piece I need is a small (about 1" high by 5" wide) piece of plexiglass that is 'vandal proof' (or whatever term they use.)
This will cover the LED readout, so it needs to be semi-clear. If you look at any modern vending machine, they all have them. Most a tinted 'blueish'
Then I need to glue it to the plastic frame (this is how the original one was done.
Two questions...
Where can plexiglass, and what type of glue (and source) do I use?
TIA
Sent from my Commodore 64 on a 2400 Baud Modem.
Eric P
"Be as beneficent as the sun or the sea, but if your rights as a rational being are trenched on, die on the first inch of your territory." Ralph Waldo Emerson
_______________________________________________
Shop-talk at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/shop-talk/patintexas@icloud.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/shop-talk/attachments/20160425/c046d9cc/attachment.html>
More information about the Shop-talk
mailing list