[Shop-talk] Drilling bolts for safety wire

[Jack Brooks]

This is how I do it too.

-----Original Message-----
From: shop-talk-bounces at autox.team.net
[mailto:shop-talk-bounces at autox.team.net] On Behalf Of Elton E. (Tony) Clark
Sent: Friday, May 02, 2014 6:07 PM
To: Eric J Russell
Cc: shop-talk
Subject: Re: [Shop-talk] Drilling bolts for safety wire

There are all sorts of $50 devices you'll find with a search but if this is
a one time deal do what I do:

Drill straight into a flat about 3/16" and then clamp the plug in something
and drill to the next flat using the first hole as a "starter" . . works
for me!
Tony in Texas


On Fri, May 2, 2014 at 7:30 PM, Eric J Russell <ejrussell at mebtel.net> wrote:

> I understand the concept of safety wiring. But how the heck does one drill
> bolts (like drain plugs) for the safety wire? Any recommended jigs?
>
> Eric Russell
> Mebane, NC
> _______________________________________________
>
> Shop-talk at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.96
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/shop-talk/eltonclark@gmail.com
_______________________________________________

Shop-talk at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/shop-talk/jibrooks@live.com