[Shop-talk] Electrolysis rust removal

[Greg Gelhar]

I have a plastic 55 gallon barrel set up just outside my shop door. I use the same washing soda/water solution until cold weather arrives. When I clean the barrel, there is enough crud on the bottom that I would change out the solution even if wasn't going to freeze.

Greg G.
Osseo, MN
T-Mobile. Americabs First Nationwide 4G Network

"Tim ." <tims_datsun_stuff at outlook.com> wrote:

>Hi All.
>
>While procrastinating a much needed oil change on my old Jeep, I decided to
>set up a rust removal tank. I am happy with how well it works. Although I'd
>rather my garage/shop area smelled of old grease instead of the perfumey gack
>from the detergent. (And no worries on the ventilation of the gases: my garage
>has no soffit and is bare wall 2x4 so the air circulates freely.)
>
>Anyway, I am wondering if any one has any thoughts or experience on how long
>the conductive solution is good for? Will this wear out eventually?
>
>Thanks
>tim
>_______________________________________________
>
>Shop-talk at autox.team.net
>Donate: http://www.team.net/donate.html
>Suggested annual donation  $12.96
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe/Manage: http://autox.team.net/mailman/options/shop-talk/greg@gelhar.com