[Shop-talk] Fwd: Re: Well water hammer?
Peter J. Thomas
pj_thomas at comcast.net
Tue Aug 26 11:35:15 MDT 2014
-------- Original Message --------
Subject: Re: [Shop-talk] Well water hammer?
Date: Tue, 26 Aug 2014 13:03:23 -0400
From: Peter J. Thomas <pj_thomas at comcast.net>
To: Jim Franklin <jamesf at groupwbench.org>
On 8/26/2014 12:44 PM, Jim Franklin wrote:
> On Aug 26, 2014, at 12:34 PM, Peter J. Thomas wrote:
>> Check the pressure tank. You can use a regular tire gauge.
> 42 psi. This is with the tank full of water, not empty.
>
> jim
>
You need to check the Schrader value with the tank empty of water and no
pressure on the water side (drain open). With the tank empty of water
there still should be some pressure on the air side of the bladder,
can't remember the amount. Reading with water in a failed tank a small
pocket of pressurized air. This will cause the pump to cycle often and
hammer.
More information about the Shop-talk
mailing list