[Shop-talk] GM rear axle C-clip removal

Dave C cavanadd at frontier.com
Sun May 12 13:16:30 MDT 2013


Sometimes you can weld a bead along the inside of the race and when it 
shrinks it'll shrink the race a little, enough to get it out.  Or you 
can weld a piece of steel across the race and use that to grab on to 
pull it out.



On 5/11/2013 7:09 PM, Randall wrote:
> In the infamous words of Emily Litella, "Never mind!"
>
> Turns out, the LSD clutches were slightly out of place (probably caused by
> yours truly initially trying to remove them) and blocking the motion of the
> C-clip.  A stout brass drift and BFH moved them back and it all came right
> apart.
>
> Now all I've got to do is get that $@# race out of the housing.  Last time I
> wound up cutting it apart to get it out, but this one maybe isn't as bad.
>
> Nah, I couldn't get that lucky!
>
> -- Randall
> _______________________________________________
>
> Shop-talk at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.96
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/shop-talk/cavanadd@frontier.com


More information about the Shop-talk mailing list