[Shop-talk] Inexpensive framing nailer/compressor

[Jim Stone]

Thanks guys.  I have a bit of time, so I will keep my eyes open (and maybe
stop by a pawn shop or two) and try to find something better than HF and keep
that as a fallback if I run out of time.

> Date: Tue, 26 Feb 2013 19:54:52 -0800
> From: cavanadd at frontier.com
> To: jandkstone99 at msn.com
> CC: shop-talk at autox.team.net
> Subject: Re: [Shop-talk] Inexpensive framing nailer/compressor
>
> I got a little twin tank compressor from Harbor Freight which seems to
> work ok.  For a nailer, I got a used Hitachi NR83A2 from a pawn shop;
> they had a bunch of them and I got the best looking one. That's the only
> nailer I ever seem to see the guys on framing crews use and they seem
> totally bulletproof.  It's also easy to get parts and nails for them.
>
>
> On 2/26/2013 12:30 PM, Jim Stone wrote:
> > I would like to buy a framing nailer.  I dont want to spend a lot as this
is
> > not something I will use often, but after recently borrowing one I realize
how
> > nice they are when needed.  I would like to keep the total costs under
$200
> > and I am weighing my options.  Does anyone here have any recommendations?
I
> > could certainly buy new at HF and keep within my budget, but would want
to
> > know that someone else had bought one and found it ok.
> > Thanks.
> > _______________________________________________
> >
> > Shop-talk at autox.team.net
> > Donate: http://www.team.net/donate.html
> > Suggested annual donation  $12.96
> > Archive: http://www.team.net/archive
> > Forums: http://www.team.net/forums
> > Unsubscribe/Manage:
http://autox.team.net/mailman/options/shop-talk/cavanadd@frontier.com