[Shop-talk] Putting floor in attic - can't fit 4x8 sheets

[Bob Jeffers]

I would just put a board floor in laying the boards diagonal. Then if you 
want to finish the floor later on or when ever just get the 1/4 inch plywood 
and fasten it on top of the boards and then you will never have a loose or 
sagging  joint.

Bob


----- Original Message ----- 
From: "Jim Franklin" <jamesf at groupwbench.org>
To: "shop-talk List" <shop-talk at autox.team.net>
Sent: Sunday, May 27, 2012 1:09 PM
Subject: [Shop-talk] Putting floor in attic - can't fit 4x8 sheets


> The way the house is constructed I can't get a 4x8 sheet into the attic. I 
> can
> do a 4x4 and with some effort a 2x8, but none of those are t&g.
>
> Any options out there besides using some kind of Simpson Tie in place of 
> the
> t&g edge support?
>
> thanks,
> _______________________________________________
>
> Shop-talk at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.96
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/shop-talk/bolin@mwt.net