[Shop-talk] Making a hole

[Peter J. Thomas]

On 6/21/2012 10:44 AM, John T. Blair wrote:
> Thanks to all that have answered.  It appears that I need to go 
> shopping for a cutting tool for a rotozip and use that in my dremil tool.
>
> I like the idea of the punches, but at $200 - $500 I think that's a 
> little more than
> I want to spend. :)
I've used dremel tools before but don't like them as the blades/grinders 
gum up.  From the friction the plastic can melt and stick to the 
blades/grinders.  Not as convenient but you could use wood working 
chisels.  Just make sure there back side has solid support or the 
plastic will crack or bend bend at the corners leaving a discoloration.

Peter T.
>
> John
>
>
> John T. Blair  WA4OHZ     email:  jblair1948 at cox.net
> Va. Beach, Va                  Phone:  (757) 495-8229
>
>           48 TR1800    48 #4 Midget    65 Morgan 4/4 Series V (B1106)
>      75 Bricklin SV1 (#0887)    77 Spitfire    71 Saab Sonett III
>                        65 Rambler Classic
>
> Morgan:    www.team.net/www/morgan
> Bricklin:  www.bricklin.org
>
> If you can read this             - Thank a teacher!
> If you are reading it in English - Thank a Vet!!
>
> From Dennis Prager - The American Trilogy:
>      e pluribus Unum, "from many, one."
>      In God We Trust
>      Liberty - the  power  of  choosing,  thinking,  and  acting for
>                   oneself; freedom  from  control  or  restriction
> _______________________________________________
>
> Shop-talk at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.96
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/shop-talk/pj_thomas@comcast.net