[Shop-talk] LED heat output

[Jeff Scarbrough]

On Wed, Jul 4, 2012 at 12:13 PM, Jim Stone <jandkstone99 at msn.com> wrote:
> However, the LEDs are now more tightly
> enclosed than before, with flammable paper just a fraction of an inch away.

If it was a problem, it would melt the lens in normal operation, I
would think...

...but...

You might check the local craft store or hobby shop for translucent
blue paint.  Or heck, even a thin coat of regular blue paint would
pass as much light as blue tape.