[Shop-talk] Tile backer board on concrete floor

John T. Blair jblair1948 at cox.net
Sat Oct 29 08:34:56 MDT 2011


At 08:11 PM 10/28/2011, Karl Vacek wrote:

 >We're going to install onyx tile in our entryway - not much over 
100 square feet.  The floor is a concrete slab, but I
 >have to build up the level by over 1-1/2" to match the adjacent hardwood.

Karl,

Would this work?  If so it should save you a ton of money and a lot 
of work work.

Use just enough floor leveler to make sure the slab is smooth and 
level.  Then lay your tile.

This will leave you with something like a 1-1/2" mismatch.  You can 
then get a piece of wood and make a transition
plate to cover the lip.

John

John T. Blair  WA4OHZ     email:  jblair1948 at cox.net
Va. Beach, Va
Phone:  (757) 495-8229

           48 TR1800    48 #4 Midget    65 Morgan 4/4 Series V (B1106)
      75 Bricklin SV1 (#0887)    77 Spitfire    71 Saab Sonett III
                        65 Rambler Classic

Morgan:    www.team.net/www/morgan
Bricklin:  www.bricklin.org

If you can read this             - Thank a teacher!
If you are reading it in English - Thank a Vet!!

 From Dennis Prager - The American Trilogy:
      e pluribus Unum, "from many, one."
      In God We Trust
      Liberty - the  power  of  choosing,  thinking,  and  acting  for
                   oneself; freedom  from  control  or  restriction


More information about the Shop-talk mailing list