[Shop-talk] the air saga continues

[Arvid Jedlicka]

I'll also add a third vote for copper. My leaks are in the plumbing on the 
tank itself ... the auto drain or ??? ... which I have not been able to 
track down. But the rest of the system is tight right up to the quick 
disconnects.

Arvid

-----Original Message----- 
From: Tim
Sent: Wednesday, June 01, 2011 12:57 PM
To: shop-talk at autox.team.net
Subject: Re: [Shop-talk] the air saga continues

I also went with copper (although my system is a much smaller scale than
other folks have). My only leak is a crappy air drier that sometimes
vents on its own.

Tim


On Wed, Jun 1, 2011 at 12:46 PM, Mike Rambour wrote:

> Best way to say it is that my air system is a bunch of leaks connected 
> together by some pipes.
>
> This talk sure makes me happy I went with copper as the only leaks I have 
> are at the quick disconnect fittings themselves.  I also have a auto-drain 
> on my compressor set to release 1 minute every hour to get rid of water in 
> the tank, it will drain the tank in a about a week anyway if I don't use 
> the compressor, so leaks in the line are not a big deal.
>
>  There has to be some thing available at the plumbing supply stores that 
> is fairly thick and that you put on the threads when you assemble the 
> pipes, you can't be the first person to run into this.  I think the vacuum 
> with epoxy is just too far fetched and too much work.
> _______________________________________________
>
> Shop-talk at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.96
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/shop-talk/tputland@charter.net
_______________________________________________

Shop-talk at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: 
http://autox.team.net/mailman/options/shop-talk/arvidj@visi.com