[Shop-talk] Firing order problems.

John T. Blair jblair1948 at cox.net
Mon Jul 25 17:01:34 MDT 2011


At 05:22 PM 7/25/2011, Steve Hammatt Mount Vernon WA USA wrote:

 >I have something similar to an old tractor engine.  The spec's say 
the firing
 >order should be 1, 3, 4, 2 but it's currently running at 1, 2, 4, 3

In addition to what Eric said, have you checked to see where #1 really is?
I've seen many an engine where the distributor has been installed wrong or
is not where most engines have it - the rotor button pointing to #1 plug.

Check to TDC on #1, then check to see that the rotor button is pointing to the
wire that goes to the #1 plug, and not just pointing to #1 cylinder.

John

John T. Blair  WA4OHZ     email:  jblair1948 at cox.net
Va. Beach, Va
Phone:  (757) 495-8229

           48 TR1800    48 #4 Midget    65 Morgan 4/4 Series V (B1106)
      75 Bricklin SV1 (#0887)    77 Spitfire    71 Saab Sonett III
                        65 Rambler Classic

Morgan:    www.team.net/www/morgan
Bricklin:  www.bricklin.org

If you can read this             - Thank a teacher!
If you are reading it in English - Thank a Vet!!

 From Dennis Prager - The American Trilogy:
      e pluribus Unum, "from many, one."
      In God We Trust
      Liberty - 
the  power  of  choosing,  thinking,  and  acting  for  oneself;
                  freedom  from  control  or  restriction


More information about the Shop-talk mailing list