[Shop-talk] coupling two shafts

[John Innis]

Try something like this?  As long as the spider is the same, you can
combine two different shaft halfs
http://www.northerntool.com/shop/tools/category_hydraulics+couplings+half-cou
plings

On Sat, Jan 8, 2011 at 2:51 PM, John Niolon <jniolon at bham.rr.com> wrote:
>   current project is  attaching a gear drive to a shaft...
>
> the output shaft of the gear drive is 3/4" and keyed
> the other shaft is smooth and 1-9/16" diameter.
>
> or course they have to be coupled end to end
>
> I think what I'm looking for is a 'motor coupler"  but can't seem to find
one
> that is female on each end.  The 1-9/16" shaft is permanent and
unmovable...
> I'll have to fabricate a mount for the gear drive so it can be anywhere...
>
> do they make a female/female-keyed coupler in my sizes that you don't have
to
> be The Donald to buy ???  suppliers ???  other suggestions
>
> thanks
> John
>
>
>
>
>
>
> I've learned in life that my primary goal
>  is to serve as a bad example
> _______________________________________________
>
> Shop-talk at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.96
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/shop-talk/jdinnis@gmail.com
>
>



--
=================================
= Never offend people with style when you   =
= can offend with substance --- Sam Brown  =
=================================