[Shop-talk] Tire changer mount, the conclusion

[Steven Trovato]

The only problem I see with that is that I don't happen to have a 
conveniently located super-heavy table.  One thing I do have, though, 
is cars.  So, I was thinking about doing something where the two 
support arms could go to pads under two tires on a car.  Haven't 
tried it, though.  It's just a concept.

-Steve Trovato
strovato at optonline.net

At 01:44 PM 2/25/2011, eric at megageek.com wrote:


>So, I came up with way that the changer can 'fold' up to my table when not
>in use, but quickly pulls out and with one nut, tightens super sturdy!