[Shop-talk] technical question about force applied to mount

[Eric J Russell]

I have a HF tire changer like that. I put some tee nuts in a piece of 3/4"
plywood (~ 4'X4' but mounted slightly off-center). To use the tire changer I
put the plywood down, attach the tire changer and have at it. As long as I
am standing on the plywood, any torque applied goes toward changing the
tire.

Eric Russell
Mebane, NC
http://home.mebtel.net/~ejrussell
----- Original Message ----- 

> Or, does anyone else have any ideas on how to mount this changer so it is
> movable?