[Shop-talk] Thread Repair

[Matt]

I wonder if it would be worth checking with a couple of machine shops to see
if they have the correct size die and could run it through for you?

Matt

---------- Original Message ----------
From: "Peter J. Thomas" <pj_thomas at comcast.net>
To: Steven Trovato <strovato at optonline.net>
Cc: shop-talk at Autox.Team.Net
Subject: Re: [Shop-talk] Thread Repair
Date: Thu, 27 May 2010 16:51:38 -0400

On 5/27/2010 3:19 PM, Steven Trovato wrote:
> I'm not sure what you meant about filing down the bad thread, but
> there are thread files made for cleaning up threads.  They are a lot
> cheaper than large dies and all you have to match is the pitch, not
> the diameter.  I guess step one is to pull the transmission as you
> have to do that anyway.  If you can see damaged threads, then hitting
> them with a thread file seems like a reasonable idea.
Are these files readily available or would I have to order one?
>   The couple of week scenario doesn't sound too pleasant.
No it doesn't.  I could live with it but the significant other will make
it unbearable.  Very late last night I contemplated just using the angle
grinder to remove the offending section of thread (its in the middle and
wouldn't matter) but thought I would query the list.

Peter T.
>
> -Steve
>
> At 03:00 PM 5/27/2010, Peter J. Thomas wrote:
>> My washing machine's transmission died so I ordered a "new" one
>> online, though not really sure it's new.  The transmission has a
>> threaded steel shaft, 1-1/8x12 I think, that a threaded aluminum
>> flange treads onto to hold the basket.  I believe the threads on the
>> shaft are bad/damaged.  I have two of the flanges.  Both thread on
>> the old transmission without any problem but both stop abruptly a the
>> same spot on the shaft of the "new" transmission.  Quick inspection
>> with the "new" transmission installed in the carcass of the washing
>> machine I don't see anything obvious with the threads.
>>
>> I'm faced with a three options: send it back with a couple of weeks
>> of turn around (and trips to a laundry mat), order a die hoping I
>> sized it correctly, or "fix" the threads.  I would rather fix it and
>> the correct method is to use a die but don't think I can buy one
>> local without ordering.  Dies this size are not cheap.  The other
>> option is to pull the transmission and file down the bad thread.  I'm
>> pretty sure the problem is localized midway down the shaft (about
>>
>> I figure someone on this list with a LBC has had to deal with with a
>> hard to replace part with damaged threads.  Any suggestions/advice?
>>
>> Peter T.
>> _______________________________________________
>>
>> Shop-talk at autox.team.net
>> Donate: http://www.team.net/donate.html
>> Suggested annual donation  $12.96
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/shop-talk/strovato@optonline.net
_______________________________________________

Shop-talk at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/shop-talk/mbarre@juno.com


____________________________________________________________
Penny Stock Jumping 2000%
Sign up to the #1 voted penny stock newsletter for free today!
http://thirdpartyoffers.juno.com/TGL3141/4bff1ffb266c2b4160st04vuc