[Shop-talk] Funny wrench request

[Randall]

Thanks to all for the suggestions.  Looks like the QuadBox is the best
solution available, so I'm going to run over to my local Ace in a bit and
see if they have one in stock.

In case anyone is interested, here is a shot of the location in question,
with the nut already removed.  The nut in the foreground is actually 1/16"
smaller than what should be in there, so you can see that the flange is
quite close to the nut.
http://tinyurl.com/2bzwo3e

And the angle of that shot makes the area seem rather roomier than it is,
here's another one (other side, with the pan/flange removed) that better
shows how close the frame member is:
http://tinyurl.com/2au5dxc

-- Randall