[Shop-talk] pvc plumbing/cement question
scott.hall at comcast.net
scott.hall at comcast.net
Tue May 26 18:11:30 MDT 2009
bastards. all of you. :-)
the filter is cut out of the system and I got out the spirit level. the pool water level is below the pipe cuts. but then I used that to build my son's play house and it leans noticeably. I no longer believe that water finds its own level.
----- Original Message -----
From: "Doug Braun" <doug at dougbraun.com>
To: "Shop Talk List" <shop-talk at autox.team.net>, "scott hall" <scott.hall at comcast.net>
Sent: Tuesday, May 26, 2009 9:50:26 AM GMT -05:00 US/Canada Eastern
Subject: Re: [Shop-talk] pvc plumbing/cement question
Arrange to have the water flow over a small paddle wheel and generator, and drain back into the pool. You could use this setup to reduce or even eliminate your electric bill.
Doug
----- Original Message -----
From: "Lee Daniels" <lee at automate-it.com>
To: shop-talk at autox.team.net
Sent: Tuesday, May 26, 2009 9:51:34 AM GMT -05:00 US/Canada Eastern
Subject: Re: [Shop-talk] pvc plumbing/cement question
Or, you may be at the intersection of the earth's rotational wobble axis and
the flux generator that keeps the magnetic north graviton flow from seeping
into your muffler bearings. Just wear an aluminum hat for a few days and all
will be well.
More information about the Shop-talk
mailing list