[Shop-talk] Engien paint recommendations

Doug Braun doug at dougbraun.com
Fri Mar 20 09:50:53 MST 2009


I used Hirsh Ford Green and Dupli-Color black, both in spray, and I was happy
with both.

Do NOT use primer on cast iron parts!  And do not use the
Dupli-Color primer on anything!.  I used the primer on a bead-blasted oil pan,
and I found that it was softer than the paint, and allow the paint to chip off
easily.  I ended up re-blasting the pan to remove all my new paint, and
redoing it without the primer.  The paint worked just fine without the primer.
Doug


--- On Fri, 3/20/09, Karl Vacek <kvacek at ameritech.net> wrote:

> From:
Karl Vacek <kvacek at ameritech.net>
> Subject: [Shop-talk] Engien paint
recommendations
> To: shop-talk at autox.team.net
> Date: Friday, March 20, 2009,
8:25 AM
> Any strong recommendations for
> high-quality engine paint ?  For
regular colors
> I usually use Dupli-Color spray cans nowadays (and it's
>
been great), but I
> need MG engine maroon, so I guess I have to order a can
and
> spray it myself.
> 
> I was thinking of either Bill Hirsh or Eastwood
engine
> paint, unless there's
> another recommendation or a warning about
either of those
> brands.
> 
> FWIW - this will be an in-place paint job over
other
> well-adhered engine
> paint, just to freshen it up after I replace
core plugs.
> 
> Thanks !
> Karl
>
_______________________________________________
> Support Team.Net 
http://www.team.net/donate.html
> 
> You are subscribed as doug at dougbraun.com
> 
> Shop-talk mailing list
> 
>
http://autox.team.net/mailman/listinfo/shop-talk
> 
>
http://www.team.net/archive


More information about the Shop-talk mailing list