[Shop-talk] Speaker signal out to RCA input

[Chad on LEG]

Continued:

look at Radio Shack part number 42-2461.
Also, you might need a ground loop isolator
(sometimes called a hum bucking coil)
RS #270-054
I'm thinking you're going from a balanced output to
an unbalanced input so could cause problems.
hope this is of value - everyone says "hope this helps" -
just adding a little variety.
chad


Chad on LEG wrote:
> I seem to recall line levels are a few hundred millivolts while
> speakers are tens of volts so you'll need to pad it down.
> I think radio shack sells cables for that purpose.
> chad
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
>
> You are subscribed as chad at linuxeg.com
>
> Shop-talk mailing list
>
> http://autox.team.net/mailman/listinfo/shop-talk
>
> http://www.team.net/archive