[Shop-talk] New Garage

[eric at megageek.com]

What I am doing is paving a pad that is 1 foot smaller in each dimension 
of the building.  That way, any snow or water on the vehicles will run to 
the sides and drop into the ground (the pavement is crowned.)

There is also a 65' X 12' driveway to the new building in that paving 
cost.

Moose
Everything I know about knots, I learned from Alexander the Great.



John Innis <jdinnis at gmail.com> 
06/25/2009 13:19

To
eric at megageek.com
cc
shop-talk at autox.team.net
Subject
Re: [Shop-talk] New Garage






So does this work when you are putting the building up on a paved pad?
 I have seen these put up before where they basically build the
building, then poured the floor, but not one built on an existing pad.
 Do they cut the pad to put in the posts, or do you have to put
anchors in the pad where the frame/posts are going to go?

On Thu, Jun 25, 2009 at 11:56 AM, <eric at megageek.com> wrote:
> I'm also paving the area first.
>
> The paving is just shy of $6K and the building I got for just shy of 
$10.
=================================
= Never offend people with style when you   =
= can offend with substance --- Sam Brown  =
=================================