[Shop-talk] Re" adhesives......

[Steve Hammatt Mount Vernon WA USA]

Thanks to everyone for their suggestions.  I've contacted the 
Technical
Support people at Loctite, they were very helpful.  The best product
is a urethane based epoxy.  Also, I took the advise to "stake" the 
ends
of the brads to slightly mushroom the head to keep the push nut from
coming loose.

Steve Hammatt
Mount Vernon WA USA
----- Original Message ----- 
From: "Art Halfnights" <halfnights at shaw.ca>
To: <shop-talk at autox.team.net>
Sent: Wednesday, April 01, 2009 11:31 AM
Subject: Re: [Shop-talk] Shop-talk Digest, Vol 3, Issue 80


> Hi Steve  epoxy or glue would do the trick.  You are wanting it to 
> go around
> the shaft and between the belt and nut face even a good glue, would 
> work if
> you put the glue around the shaft at the belt face and then screwed 
> the nut
> on ,then the addietion would be better, belt face to nut face.  And 
> not too
> messy ???   A leather crafting outlet , or shoe repair or Lapages 
> webb site
> might be the place to get the best glue??/  Regards  Art Halfnights
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
>
> You are subscribed as gsteve at hammatt.com
>
> Shop-talk mailing list
>
> http://autox.team.net/mailman/listinfo/shop-talk
>
> http://www.team.net/archive


--------------------------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.0.238 / Virus Database: 270.11.35/2034 - Release Date: 
04/01/09 06:06:00