[Shop-talk] recessed triangular screw heads

[Brian Kemp]

Mark - Sorry about the mix up on the part number.  The bit I was talking 
about is just like a square drive bit, but with 3 sides.  My set is in a 
red rubber type case just like the one for 93388, but was purchased a 
few years ago.  The easiest thing might be hitting a cheap screwdriver 
with a bench grinder to make your own since a bit isn't long enough even 
if you had one.

Brian

Mark Andy wrote:
> Howdy,
>
> On Tue, 9 Sep 2008, Brian Kemp wrote:
>   
>> I had the right one in a set of 32 "security" bits, part number 93388, 
>> from my local Harbor Freight for $4.99 on sale.  It was for a Easter 
>> bunny toy that broke.  It also includes 3 blade philips type tips and 
>> Torx bits with a hole in the center, used to replace a fuse in the 
>> microwave.
>>     
>
> I've got that set... Two problems...
>
> First, it doesn't have the full triangle recessed bit.
>
> Second, the 3 bladed "phillips" bit probably would work, except that its 
> not long enought to get down the recessed hole the screw is in, without 
> the holder hitting the sides of hole.
>
> Mark
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
>
> You are subscribed as bk13 at earthlink.net
>
> Shop-talk mailing list
>
> http://autox.team.net/mailman/listinfo/shop-talk
>
> http://www.team.net/archive