[Shop-talk] Reviving a carb

[Jack Brooks]

Turpentine or other "not so fast" evaporating distillate should be fine,
assuming there were no plastic parts in there.

Jack 

-----Original Message-----
From: shop-talk-bounces+jibjib=att.net at autox.team.net
[mailto:shop-talk-bounces+jibjib=att.net at autox.team.net] On Behalf Of
eric at megageek.com
Sent: Friday, May 23, 2008 4:22 AM
To: shop-talk at Autox.Team.Net
Subject: [Shop-talk] Reviving a carb

OK, so I borrowed a rototiller from a friend that hasn't used it in years.

Besides the exhaust valve being stuck (I fixed that,) the carb seems to be
varnished.

I dissembled it and cleaned everything that I could reach.  It seems there
isn't much access to the insides of this carb (it's a small B&S motor.)

So, is there a product I can leave the carb soaking in for a while to break
up the old gas? 

I leave for Iraq in a few weeks and I wanted to rototill before I left. 

Thanks.

Inch

"We all know we're dying, And there's no sign of a parachute."
     Tori Amos
You are subscribed as jibjib at att.net

Shop-talk mailing list

http://autox.team.net/mailman/listinfo/shop-talk

http://www.team.net/archive