[Shop-talk] Torque Wrench

[Chad on LEG]

let me try this way:
http://www.gulfcoastautocrossers.com/milwaukeetools.wmv



----- Original Message ----- 
From: "Chad on LEG" <chad at linuxeg.com>
To: "Bob Spidell" <bspidell at comcast.net>; "Shop-Talk" 
<shop-talk at autox.team.net>
Sent: Tuesday, July 29, 2008 12:43 AM
Subject: Re: [Shop-talk] Torque Wrench


> Just came across this a day or so ago, your timing
> couldn't have been better. If attachments aren't allowed
> I sent the URL.
> chad
>
> ----- Original Message ----- 
> From: "Bob Spidell" <bspidell at comcast.net>
> To: "Shop-Talk" <shop-talk at autox.team.net>
> Sent: Monday, July 28, 2008 11:31 PM
> Subject: [Shop-talk] Torque Wrench
>
>
>> Folks,
>>
>> I need a 1/2-inch drive ratchet torque wrench.  Recommendations?
>>
>> TIA,
>> bs
>>
>> -- 
>> *******************************************************************
>> Bob Spidell           San Jose, CA            bspidell at comcast.net
>> *******************************************************************
>> _______________________________________________
>> Support Team.Net  http://www.team.net/donate.html
>>
>> You are subscribed as chad at linuxeg.com
>>
>> Shop-talk mailing list
>>
>> http://autox.team.net/mailman/listinfo/shop-talk
>>
>> http://www.team.net/archive
>
> [demime 1.01d removed an attachment of type video/x-ms-wmv which had a 
> name of milwaukeetools.wmv]
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
>
> You are subscribed as chad at linuxeg.com
>
> Shop-talk mailing list
>
> http://autox.team.net/mailman/listinfo/shop-talk
>
> http://www.team.net/archive