[Shop-talk] Tabbed axle washers

[Mark]

Karl,

Maybe if you order new washers from Moss they will be made in China which
means thinner and/or softer steel.  .

Mark

  ----- Original Message -----
  From: Chris Kantarjiev
  To: Karl Vacek
  Cc: shop-talk at autox.team.net
  Sent: Tuesday, July 15, 2008 1:42 PM
  Subject: Re: [Shop-talk] Tabbed axle washers



  Karl Vacek wrote:
  >
  > Ummm, yeah, sure......
  >
  > I'll do this to take off a thousandth or two on a thrust washer, and in
  > fact that's how I turned decent flat washers into relatively
  > true-thickness shims for the bearings, but to take off .040" or so ??