[Shop-talk] Rivet Steel to Aluminum (or Epoxy?)

Rush jdrush at enter.net
Sat Jan 19 16:23:56 MST 2008


Awesome site! Thanks, Bob. The well nuts would make the steel plates 
stand off the aluminum, so they wont work, but on that site there was 
this page http://www.thread-rite.com/plastic/index.htm which is sure to 
have exactly what I need, once I take delivery and find out the hole 
size. Now I gotta go find my mastic.

Thanks again,
Jon

Bob Kegel wrote:

>>There are holes that are predrilled, but I think they are too 
>>large for rivets because they were designed for screws.
> 
> 
> Something like this: http://www.thread-rite.com/pop_nuts/well_nut_sleve.htm
> seems to address both  the oversize hole and galvanic action issues.
> 
> Bob Kegel
> Aberdeen, WA
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
> 
> You are subscribed as jdrush at enter.net
> 
> Shop-talk mailing list
> 
> http://autox.team.net/mailman/listinfo/shop-talk
> 
> http://www.team.net/archive


More information about the Shop-talk mailing list