[Shop-talk] [Spits] Rusty Panel treatment
Doug Braun
doug at dougbraun.com
Thu Aug 28 15:31:23 MDT 2008
You really ought to get it sandblasted or
bead-blasted, since it is already separate from the
vehicle.
If you really can't do that, you could sand off most
of the rust, and use a phosphoric acid based product
to deal with the rest. If you do this, you can
probably prime it with epoxy primer and not have to
mess with "rust encapsulator" type products.
Doug
--- Barry Schwartz <v6spitfireguy at cox.net> wrote:
> What kind of treatment would work best for coating
> the part after sanding
> down as much of the rust as I can? Eastwoods rust
> encapsulator, I have
> some of that? Remember, this isn't a frame or
> hidden part, but an exterior
> body panel - so it would be primed and painted -
More information about the Shop-talk
mailing list