[Shop-talk] 3 phase and phase converters
Gerald Brazil
gerrybraz at cablespeed.com
Sat Aug 23 21:06:27 MDT 2008
Dan I run a 3 phase mill on a Variable Frequency Drive.....and love
it....you get infinite speed control with full torque. You should however
provide a supplementary cooling fan for when you are running on a slow speed
since the fan built into the motor won't flow enough air. If you are not
happy with the static phase converter, investigate a VFD. Everybody I know
who uses them wouldn't do it any other way.
-----Original Message-----
From: shop-talk-bounces+gerrybraz=cablespeed.com at autox.team.net
[mailto:shop-talk-bounces+gerrybraz=cablespeed.com at autox.team.net] On Behalf
Of Dan and Jenny Fest (Coles Nurseries Inc)
Sent: Saturday, August 23, 2008 9:02 PM
To: shop-talk at autox.team.net
Subject: [Shop-talk] 3 phase and phase converters
I recently purchased a small Bridgeport Milling machine. It draws 3.3 amps
at 480 v(three phase). I also purchase a used static phase converter. Has
anyone ran a milling machine this way or has experience hooking up one using
a phase converter. You help is appreciated. Dan
You are subscribed as gerrybraz at cablespeed.com
Shop-talk mailing list
http://autox.team.net/mailman/listinfo/shop-talk
http://www.team.net/archive
More information about the Shop-talk
mailing list