[Shop-talk] wheel balancers

[Jack Brooks]

Exactly!  A standard machine cannot hit those points.  They need the Rudge
specific adapter.

Jack 

-----Original Message-----
From: shop-talk-bounces+jibjib=att.net at autox.team.net
[mailto:shop-talk-bounces+jibjib=att.net at autox.team.net] On Behalf Of Eric J
Russell
Sent: Friday, November 16, 2007 6:18 PM
To: shop-talk at autox.team.net
Subject: Re: [Shop-talk] wheel balancers

http://www.mgaguru.com/mgtech/wheels/wl110.htm

Eric Russell
Mebane, NC
http://home.mebtel.net/~ejrussell

----- Original Message -----
From: "Jack Brooks" <jibjib at att.net>
To: <shop-talk at autox.team.net>
Sent: Friday, November 16, 2007 9:07 PM
Subject: Re: [Shop-talk] wheel balancers


> > especially for British wire wheels.
>
> FYI - I've proven to two different shops that without the Rudge 
> specific
> adapter, they cannot balance center lock wheels.  The angles are 
> very
> different than standard parts and reproducible results cannot be 
> achieved.
> I had one guy try four times and each time the results were so far 
> off, that
> he could not even consider arguing.
>
> Jack
_______________________________________________
jibjib at att.net

Shop-talk mailing list

http://autox.team.net/mailman/listinfo/shop-talk